S-Cutter
7
● Make sure the power is connected to the ground.
Leakage current due to electric shock may occur if the product is not connected to the
grounding.
● Do NOT pour water or cutting fluid.
Due to water or other liquids on the electric motor, electric shock, or death may occur.
Use cutting fluid until tools are slightly wet.
● Do NOT use tools in wet conditions or rain.
Serious injury or death may occur by electric shock.
● Avoid fingers, hands or clothes to touch the blade while operating.
When fingers, hands, or other body parts stuck in the machine, it may occur serious injury.
● Avoid fingers, hands or other body parts to touch where pipe and roller meet while
operating.
When fingers, hands, or other body parts stuck in the machine, it may occur serious injury.
● Before supplying power to the product, be sure to turn off the operation switch.
Plugging in with the switch on may cause sudden rotation and occur serious injury.
● Do NOT let any part of body to touch the compression device of product.
Serious injury may result.
● Make sure to wear safety equipment.
Chips generated during the operation may scatter and cause serious eye injury.
● Be sure to apply our supplied product and cutting blades only for their intended uses.
Use only products certified for their quality (state-certified or higher-quality) in the event
there is difficulty in procuring our products and accessories.
If violated, performance degradation and serious injury may occur.
● Do NOT leave the product rotated.
workers may result in bodily injury.
● Place cutting chips safely.
When cutting chips meet flammable substances, it may cause fire and burns.
● Wear gloves and long-sleeved clothes to wear.
Scattering chips can cause burns.
● Use Extension cord as short as possible.
If too long or too thin, it may cause overload.
● Operation before commissioning.
Check the machine before use for safety.
WARNING
CAUTION
Summary of Contents for S LT Series
Page 28: ...S 100LT S 150LT S 200LT...
