dCS
Rossini Transport User Manual
Software Issue 1.0x
September 2018
Rossini Transport Manual v1_0x
Page 14
English
version
STEP 3 – Playing a Disc
•
Press
the
Stop/Eject
button.
The display will show
OPEN
.
•
Load a CD or SACD into the tray with the label upwards and either push the tray in gently or press
the
Stop/Eject
button again.
The display will show
CLOSE
, then
LOADING
. The disc type will be identified, either
CD
or the SACD
logo will appear on the display, along with the number of tracks and the total playing time. The
Transport will play the SACD layer of a hybrid disc by default, but if you wish, you can select the CD
layer instead by pressing the
Layer
button.
•
Press
the
Play
button. Turn up the Volume to a comfortable level.
You should have audio. For all discs, the disc type and elapsed time will be displayed.
•
Press
the
Play/Pause
button to pause playing, press again to resume playing.
•
Press
the
Fwd
or
Rwd
button to skip to the next track or the previous track.
•
Hold
down
the
Fwd
or
Rwd
button to jog through the track - the speed will increase the longer you
hold the button down. Most owners will use the remote control for this.
•
Press
the
Stop/Eject
button to stop the disc. Press it again to open the tray.
The IR Remote Control gives access to other features, such as track number selection, repeat track or
disc and programming a track sequence.
To program the track sequence 6 - 8, stop the disc and press the remote
Program
button – the
Transport will display
P00
. As an example, press
6
or
06
– the display will change to
P01
. Press
8
or
08
– the display will change to
P02
. Start the disc to play the track sequence. Press the remote
Program
button to toggle in/out of program mode. Press the
Clear
button to cancel program mode. or
open the CD tray.
The next step is crucial – sit back and enjoy the music.
When you have finished listening, you can either keep the system warm by setting it to Sleep mode
(press the
Power
button briefly) or switch off (hold down the
Power
button until
SWITCHING OFF
is
displayed, then release).
Controlling Disc playback with the app
!
App control is not implemented in the initial release for the Rossini Transport (v1.00), the
current versions of the Rossini Player / DAC (v1.10) or the Rossini app (v1.4.8). We
intend to add this feature in the next set of updates. Please see
www.dcsltd.co.uk
for
news.
You can use the Rossini app to control the Transport via a Rossini DAC or Player.
•
Connect the DAC / Player to the Transport with Dual AES.
•
Connect the DAC / Player to the Transport with an RS232 “null modem” cable between the RS232
ports.
Set the RS232 Mode on the Transport and DAC / Player to Binary.
Go to the app’s Home page and tap
Disc
.
The Rossini app will then give access to the same features as on the IR remote control.
