dCS
Rossini Transport User Manual
Software Issue 1.0x
September 2018
Rossini Transport Manual v1_0x
Page 12
English
version
STEP 2 – Choosing a Sync Mode
So far, the system has been set up to lock to the clock generated by the source. This is the simplest
arrangement, but it does not give the best sonic performance due to clock jitter.
Using the DAC in Master Mode
If you have a Rossini Clock, go to the next page.
You can reduce the jitter in your system by using the Rossini DAC in Master mode and slaving the
Transport to it.
Figure 2 – Using the Rossini Transport with the Rossini DAC in Master Mode
•
Use the DAC’s
Input
button to select the input you want to use (
AES1+2
in the example).
•
Connect the DAC’s
Word Clock Out
connector to the Transport’s
Word Clock In
connector.
Set the DAC
’
s
Settings > Sync Mode
menu page to
Master
mode.
The Transport will lock to the Word Clock and display this icon.
Analogue
outputs
to Amplifier
