dCS
Rossini Transport User Manual
Software Issue 1.0x
September 2018
Rossini Transport Manual v1_0x
Page 26
English
version
DISPLAY SETTINGS Menu
Brightness
Set the display
Brightness
to a comfortable level using the
◄
or
►
buttons. Press the
Menu
button to exit.
Display On/Off
This page is usually set to
On
.
When set to
Off
and the menu closes, the display will turn off after a few seconds. The
display will turn on briefly when a control setting is changed. The display will stay on if
the CD tray is open or the menu is open.
Logo On/Off
When
set to
On
, the
dCS
logo at the left side of the display is illuminated.
When set to
Off
, the logo is not illuminated.
GENERATOR Menu
Channel Check
A routine to test the system for swapped channels. A tone is output on the left channel
only while the display shows
Left
, then the right channel only while the display shows
Right
. If these are the wrong way around, the left and right channels are swapped
somewhere in your system.
Phase Check
A routine to test the system for phase reversals. Noise is output in phase on both
channels while the display shows
In Phase
. Press the
Menu
button, the noise on the
right channel is inverted while the display shows
Out of Phase
. The first burst should
produce a central image, the second burst should not. If these are the wrong way
around, one channel in your system is phase inverted. Press the
Power
button to stop
the test and return to the menu.
Burn In
A procedure to condition your system. The unit displays
Burn In Caution! Loud
, then
outputs modulated pink noise that ramps up and down slowly in level. Press the
Menu
or
◄
or
►
buttons to stop the procedure.
!
Please ensure that the volume level is reasonable, as careless use of the
Burn In
feature
can damage your amplifiers and loudspeakers.
dCS
will not be liable for such damage.
