dCS
Rossini Transport User Manual
Software Issue 1.0x
September 2018
Rossini Transport Manual v1_0x
Page 18
English
version
Power Button
To switch on, ensure the rear panel power switch is set to
I
and press the
Power
button (I) on the front
panel once. Note that the unit cannot be turned on from the remote control.
To set the unit to sleep mode, press the
Power
button once. The main display will turn off, the LED
beside the button will illuminate and the mechanism will stop, but the unit will remain close to running
temperature. Press again to return to normal operation.
To switch off, hold down the
Power
button for about 5 seconds until
SWITCHING OFF
appears on the
display, then release it.
When the menu is open, press the
Power
button to close the menu.
