DCN DCRS-9800 Series, Install Manual

Page: 48 / 63

DCRS-9800 InstallManual Chapter 2 Hardware Installation
2-8
z Category 5 cable with RJ-45 connector
2.6 Hardware Installation
The installation of the DCRS-9800 includes the following:
&
Switch mounting
„ Desktop installation
„ Rack-mounting the switch
&
Switch grounding
&
Cards and modules installation
&
Connecting to the Console
„ Connecting to the Console port
&
Connecting to the Management Port
„ Connecting to the Ethernet port
&
SFP transceiver installation
„ Install the SFP transceiver in the SFP slot
&
XENPAK transceiver installation
„ Install the XENPAK transceiver in the XENPAK slot
„ Copper Cable/Fiber cable connection
„ Ethernet cable connection
„ Fiber cable connection
&
Power supply connection
2.6.1 Switch Installation
2.6.1.1 Desktop installation
z
Note:
● Choose a smooth level workbench
● Verify that the workbench is strong enough to support the DCRS-9808’s fully
configured weight
● Plan a good position for your DCRS-9808 that is easy to operate and has an
appropriate power source and grounding point.
● Place the DCRS-9808 safely on the workbench, avoid obstructions on any side of
the switch.