DCN DCRS-9800 Series, Install Manual

Page: 18 / 63

DCRS-9800 InstallManual Chapter 1 Product Overview
1-16
z
40G XFP fiber interface line card(MRS-9800-4XFP): implements 2-layer and
3-layer wire-speed switching and routing function of 4 10000Mbps optical
interfaces and IPv6 wire-speed transmission, supports MPLS function.
1.4.2.1 MRS-9800-MI
The MRS-9800-MI is switching module for the DCRS-9800 series switch. System
status control, switch management, user access control and management, and network
maintenances are performed here. The board can be inserted into M1 or M2 slots of the
chassis for Master-Slave redundancy.
1.4.2.1.1 Front Panel
The MRS-9800-MI comes with 1 CF card port, 1 Console port (control console), 1
10/100Base-Tx Ethernet port (management port) and a reset key.
The Front Panel view is shown below:
Fig 1-7 MRS-9800-MI Front Panel view
1.4.2.1.2 Front Panel - Indicator
The following table describes the front panel indicators of MRS-9800-MI:
Table 1-1 MRS-9800-MI indicators description
1) PWR
：
the power-on indicators of the board
Indication
Light
Meaning Status Description
On (Green) Card powered
PWR power
indicators Off
Card powered off
2) Run
：
the run status indicators of the board
Indication
Light
Meaning Status Description
Green, blink Cards operating normally RUN run status
On all along
or off
Cards operating abnormally
3) M/S
：
Master-Slave indicator