Instruction Manual
GH05 GAS HEATER WITH TURBO
dcg16.it
28
2) The electric combination switches operation method
a. Breeze machine switch
Press on the button for turbo fan only,the turbo fan will work and can
blow cold breeze.
b. Heating element switch
Turn on the turbo
an
rst, then press on the button
or heating
element. The heating element will begin to work,at the same time,
the turbo fan blows hot breeze. If the the turbo fan does not work,
heating element can not work.There are two buttons for heating
element,press one button is 750 Watts. Two buttons be connected,
the power is totally 1500 Watts.
Atention:
The fan heater is with overheating protection.If the fan heater is too
hot,the heating element will not work.You should disconnect the
power code to wait for some minutes until the heater is cold,then it
could be restarted again.
WARNING
1.
Never attempt to light if the hose appears loose or damaged in
any way.
2.
Do not press the ignition button for more than 40 seconds.
3.
Never disconnect the regulator while cylinder valve or regulator
is open.
4.
Don’t change cylinders with in area in which open
re exists.
5.
Don’t expose your cylinder to extreme heat.
6.
Do not store any other cylinders in the room in which your heater
is being used.
7.
Do not insert your
nger or any other material through the
ront
panel of the heater.
8.
Leave at lease 1 meter distance between your heater and any
other heat source.
9.
Do not let unauthorized persons tamper with your heater.
Summary of Contents for GH05
Page 1: ......
