Instruction Manual
GH05 GAS HEATER WITH TURBO
dcg16.it
27
to hold the control knob down for 10-15 seconds more. Release
the button i
the pilot fame goes out repeat the above operation
HEAT SETTINGS
To change from minimum to maximum gently press control button
and turn it position 3.
To change from maximum to medium gently press control button
and turn it position 2.
Turn off heater at cylinder or turn the switch on the regulator to the
“OFF” position. If the heater is not be used for a period of time
disconnect the regulator from the cylinder and replace any value
protection plug or cover
Attention!
Please do not forcefully turn the control knob, the button should be
pushed down before changing the heat control settings. The control
button will not turn without pushing downwards. Ensure the button
is locked into the heat setting /position required.
2.HEATING FAN OPERATION:
Importan:The fan heater could start to work after the thermostat turn
on.
1) Control knob of thermostat
To use the fan heater,you should regulate the temperature by the
thermostat
rst.Turn the thermostat knob clockwise,once you hear
a “Click”,that means the thermostat start to work.You could set up
the temperature from 0-32 degree roughly,then to turn on the fan
heater.To turn off the fan heater,you could turn the thermostat knob
anti-clocksise until you hear a “Click” or by the button of the fan
heater.
Summary of Contents for GH05
Page 1: ......
