Instruction Manual
GH05 GAS HEATER WITH TURBO
dcg16.it
24
and any other sources of ignition.With the regulator connected to
the cylinder turn on the regulator control. Brush all hose connections,
pipe connections to the valve and gas cylinder with a 50;50 solution
of detergent and water or a leak detection spray. A stream of bubbles
forming indicates a leak.If a leak is found turn off at the regulator and
disconnect the regulator from the bottle and remove the gas cylinder
outdoors or to a well ventilated area. Contact your gas supplier for
assistance. DO NOT USE THE HEATER..
Fix the rear cover after leakage test.
HOW TO CHANGE A CYLINDER
1. Turn off at the regulator and allow the heater to cool fully before
removing and replacing the cylinder. Do not attempt to replace
the cylinder whilst the heater is still in use.
2. Cylinders must be replaced in a fame
ree environment.
3. Do not smoke while changing the cylinder
4. When you need to replace your empty cylinder, turn the gas off
at the valve or regulator and take the empty cylinder out of the
heater.
5. Remove the regulator from the empty cylinder.
6. Follow the steps described under “Connecting the Cylinder”,
connect a new cylinder.
FUNCTION INTRODUCE:
1. Gas and Electric Function
This product’s design keeps warm from gas burnr and electric used.
2. Multiple protection function
*Oxygen Depletion protection function (ODS):
This product equip
with ODS, once appearing the circumstance of oxygen shortage, this
ODS device will cut off the Gas Supply for protection.
*Over-Heat protection function:
This electric heater equip
with Thermostat, if the product is not used correctly to make the
Summary of Contents for GH05
Page 1: ......
