DCB EtherSeries EDNP-3, User Manual, Page: 30 / 70

EtherSeries DNP- 3 Gateway User’s Guide
Main Menu Option 6.
DNP Serial Configuration
Selecting (6) from the Main Menu will
result in the following screen:
DNP SERIAL CONFIGURATION:
Port 1 DNP Address Low: 256 (0100 hex)
Port 1 DNP Address High: 65527 (FFF7 hex)
Port 2 DNP Address Low: 256 (0100 hex)
Port 2 DNP Address High: 65527 (FFF7 hex)
SET DNP SERIAL CONFIGURATION:
1 Port 1 DNP Address Low [0 - 65534]
2 Port 1 DNP Address High [0 - 65534]
3 Port 2 DNP Address Low [0 - 65534]
4 Port 2 DNP Address High [0 - 65534]
0 -- Return to previous menu
EXAMPLE: To set the Port 1 low address limit to 200
=> 1 200
Enter Command =>
Use this screen to configure DNP serial configuration values.
For each of the ports (1 or 2) configure the following…
RTU DNP Address Low
Configures the lowest address of an RTU on this port.
RTU DNP Address High
Configures the highest address range of an RTU on this port. If
the ranges of port one and port two overlap, addresses in the
overlap will be sent to port one.
.
20