DCB EtherSeries EDNP-3, User Manual

Page: 27 / 70

Configuration
Main Menu Options 3 & 4.
Serial Port Configuration
Selecting (3) from the Main Menu will result in the following
screen for port 1. Selecting (4) from the Main Menu will result
in a similar screen for port 2.
PORT 1 CONFIGURATION:
Baud Rate: 9600
RS485: 4-wire [RS232 selected]
TX Delay after RTS Active: 0 ms
SET PORT CONFIGURATION:
1 Baud Rate [0=230400, 1=115200, 2=57600, 3=38400,
4=19200,
5=9600, 6=4800, 7=2400, 8=1200,
9=600, 10=300]
2 RS485 Mode [0=4-wire, 1=2-wire]
3 TX Delay after RTS Active [0 - 5000 ms]
0 -- Return to previous menu.
EXAMPLE: To set the baud rate to 9600
=> 1 5
Enter Command =>
This screen configures the settings for the serial ports. The
settings used should match the device connected to the serial
ports of the gateway.
Baud Rate
Speeds between 300 bps and 230.4Kbps are supported.
RS-232/422/485 Mode
Configure the port for either RS-422/485 4-wire, RS-485 2-
wire, or RS-232.
17