DCB EtherSeries EDNP-3, User Manual, Page: 26 / 70

EtherSeries DNP- 3 Gateway User’s Guide
Main Menu Option 2.
Set Manager/Telnet IP Address
Selecting (2) from the Main Menu will result in the following
screen. Caution! If these addresses are set, only those nodes
will be allowed to configure the unit.
MANAGER CONFIGURATION:
Entry Manager_IP_Addr
***** ***************
1. 0.0.0.0
2. 0.0.0.0
3. 0.0.0.0
4. 0.0.0.0
SET MANAGER CONFIGURATION:
set Entry_Number IP_Address
clear Entry_Number
0 --Return to main menu.
EXAMPLE: To set entry #3 to IP address=138.239.0.24,
=> set 3 138.239.0.24
EXAMPLE: To clear entry #2 IP address,
=> clear 2
Enter Command =>
This screen shows a table containing four (4) entries. By
default, all entries are blank. These entries provide a security
feature. Only a user at one of the IP addresses shown can
manage the unit. (All users on the LAN can still use the
gateway, but not configure it.)
If the entries are blank, then any user on the LAN can
configure the gateway.
Entries in the table cannot be edited, but commands are
provided to insert (SET) and delete (CLEAR) entries.
16