manualshive.com logo in svg

dbx Zone Pro 640, User Manual

The dbx Zone Pro 640 brings enhanced audio control to your fingertips. With this versatile device, amplifying sound has never been easier. Explore its full potential by downloading the comprehensive user manual, completely free of charge, from our website manualshive.com. Unleash your creativity and get the most out of your dbx Zone Pro 640 today!

Share
Download
background image

Getting Started

®

ZonePro

™

User Manual

4

Section 1

ZonePro

™

When setting up the ZonePro units, make connections as follows: 

• Always make connections prior to applying power to the unit. 
• Connect the outputs from the sending devices (mixer, microphone, CD, DVD player or

satellite, etc..) to either of four RCA, or two Euroblock input connectors.   

• Make output connections from the Euroblock connectors to the

input of the selected power amps or powered speakers.

• It is recommended that the power amps are turned off prior to cycling power to the

ZonePro.  Always make sure that your power amps are the last item turned on and the first
turned off.  Once all of the connections have been made and the unit is powered up,  you
can navigate through the entire signal path of the ZonePro from the included GUI.  

Minimum System Requirements

1 GHz processor
Windows 2000 or XP
128 meg RAM
Recommended screen resolution:
1024 x 768 pixels or higher

Installation

• Install the ZonePro GUI software from either the dbx website at www.dbxpro.com or from

the included CD ROM onto your computer.

• Once the software setup is downloaded, double click on the file named: ZonePro setup.
• The application will proceed to prompt you for the installation location.
• Once the software installation has been completed, it is recommended that you restart your

computer.

Note:You must disable virus protection software during the installation of ZonePro Designer.

1.5  - PC GUI Installation 

1. 4 - Connections  

Example Setup

Summary of Contents for Zone Pro 640




























































Reviews:

No comments

Related manuals for Zone Pro 640

Panasonic WJ-NV200K Quick Reference Manual preview
WJ-NV200K
Brand: Panasonic Pages: 4
Barco EX Safety Manual preview
EX
Brand: Barco Pages: 100
IEI Technology WSB-H610 User Manual preview
WSB-H610
Brand: IEI Technology Pages: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Brand: IEI Technology Pages: 71
Xinje XG Series User Manual preview
XG Series
Brand: Xinje Pages: 76
ekwb EK-Vector Radeon RX5700 + XT Backplate Installation Manual preview
EK-Vector Radeon RX5700 + XT Backplate
Brand: ekwb Pages: 7
SIIG NN-EC2812-S1 Quick Installation Manual preview
NN-EC2812-S1
Brand: SIIG Pages: 12
Direct IP IDIS DR-1304P Operation Manual preview
IDIS DR-1304P
Brand: Direct IP Pages: 76
IDT DBP 7+4 User Manual preview
DBP 7+4
Brand: IDT Pages: 93
FDI ELI70-CR Quick Start Manual preview
ELI70-CR
Brand: FDI Pages: 2
Intel E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core Processor Datasheet preview
E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core Processor
Brand: Intel Pages: 112
IEI Technology PulM-1G4T-I211 Quick Installation Manual preview
PulM-1G4T-I211
Brand: IEI Technology Pages: 2
Xantech CC62 Installation Instructions preview
CC62
Brand: Xantech Pages: 5
IEI Technology PUZZLE-IN005 User Manual preview
PUZZLE-IN005
Brand: IEI Technology Pages: 106
Bdcom GP3600-16 Hardware Installation Manual preview
GP3600-16
Brand: Bdcom Pages: 25
Balluff BNI EIP-508 05-Z015 Series User Manual preview
BNI EIP-508 05-Z015 Series
Brand: Balluff Pages: 74
Ecos SECURE BOOT STICK FX Administrator'S Manual preview
SECURE BOOT STICK FX
Brand: Ecos Pages: 22
Ericsson Baseband 6648 Manual preview
Baseband 6648
Brand: Ericsson Pages: 16

Brands by name

Popular brands

Load more brands