DBI SALA First-Man-Up, User Instruction

Page: 14 / 24

14
Step 3. To close the snap hook around the D-ring, release the snap hook from the
connector tool, pull down slightly on the lifeline, twist the extension pole
counter-clockwise while pushing up slightly. The snap hook should close
over the D-ring and release from the connector tool. Do not pull down on the
extension pole. Tug on the lifeline to ensure the snap hook is securely
attached to the D-ring.
WARNING: The snap hook must only be attached to the small D-ring on the tie-off
adaptor as shown in Figure 12. Do not attach the snap hook to both D-rings.
Step 4. Retract the extension pole to the minimum length. Remove the snap hook
connector tool from the extension pole. See section 6.0 for cleaning and
storage.
Figure 12