13
C.
CONNECTING THE SNAP HOOK TO THE TIE-OFF ADAPTOR:
Step 1.
See Figure 11. To lock the snap hook open, pull the snap hook up, which
causes the cam to push back the gate lock and the roller to open the gate.
Continue pulling up until the cam rotates and seats under the gate lock,
which locks the gate open. The snap hook must be locked open before
attaching to the tie-off adaptor.
Step 2.
To connect the snap hook to the tie-off adaptor, extend the pole to the
required length. Place the snap hook onto the small D-ring on the tie-off
adaptor. See Figure 12.
WARNING:
Hold the lifeline against the extension pole, with a small amount of
tension, so that the snap hook does not unintentionally detach and fall.
Figure 11
Summary of Contents for First-Man-Up
