12
3.2 USING THE SNAP HOOK CONNECTOR TOOL:
A.
ATTACHING THE SNAP HOOK CONNECTOR TOOL:
To install the snap hook connector tool onto the extension pole, depress the
snap buttons on each side of the tool insert and slide into the open end of the
extension pole. Ensure the snap buttons lock into the holes on the extension
pole.
B.
ATTACHING THE SNAP HOOK TO THE SNAP HOOK CONNECTOR
TOOL:
Attach the snap hook to the snap hook connector tool between the roller and cam
as shown in Figure 10. The thumb lever must be in contact with and below the
roller, and the gate lock must be in contact with the cam.
Figure 10
Summary of Contents for First-Man-Up
