DBI SALA First-Man-Up, User Instruction

Page: 8 / 24

8
C. ATTACHING THE TIE-OFF ADAPTOR TO THE TIE-OFF ADAPTOR
CONNECTOR TOOL:
See Figure 6. With the strap arm fully extended, place the small D-ring into the
groove on the end of the strap arm, with the narrow web facing up. Run the tie-off
adaptor, with the narrow web against the strap arm, along the bottom of the strap
arm and rotate the strap rod up until it locks in place.
IMPORTANT:
The strap rod must fully capture and hold the tie-off adaptor in
place as shown. If the strap rod does not securely lock, adjust the lock tension with a flat
head screw driver as shown in Figure 6. If the strap rod is loose, adjust the strap rod
tension with a 5/32 inch allen wrench as shown in Figure 6.
Figure 6