Daytona P200T, User Manual

Page: 51 / 60

Chapter 4 - Technical Specification
This device emits a complex pulse pattern from the front aperture of the device.
Wavelengths:
635 nm ±5nm, 532 nm ±2nm
Peak power
: 4 mW
Single frame exposure duration:
less than 0.4
seconds
Angular period of scan:
70μs rad-1
4.2.1 External Laser warning information
Location of Laser warning Warning information
Positioned on the rear scan
head cover.
CLASS 1 LASER DEVICE
4.2.2 Internal Laser warning information
Location of Laser warning Warning information
Positioned on the beam cover.
VISIBLE AND INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
4.2.3 Laser classification
Laser classification Classification information
System
Class 1 as defined by IEC/EN 60825-1
Class 1 as defined by 21 CFR1040.10 and 1040.11.
Embedded
Class 3B as defined by IEC/EN 60825-1
Class IIIb as defined by 21 CFR1040.10 and 1040.11.
4.3 Electromagnetic compatibility (EMC)
The P200T is intended for use in the electromagnetic environment as specified in the following tables. The
customer or the user of the device should assure that it is used in such an environment.
4.3.1 Guidance and manufacturer declaration - electromagnetic emissions
TABLE 12: List of electromagnetic emission compliance
Emissions test
IEC60601
compliance
test level
Electromagnetic environment-guidance
RF emissions
CISPR 11
Group 1
The P200T uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are
NOT
likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The P200T is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC61000-3-3
Pst
Dmax
Page 51 of 60
Part Number:
G102748/11_ENG
Copyright
2021
, Optos plc. All rights reserved.
English