Daytona P200T, User Manual

Page: 27 / 60

Chapter 3 - How to...
3 How to...
Before using the system and capturing images, you should be familiar with all the features and capabilities of
the system.
3.1 Get started
CAUTION
Read the warnings and cautions before using your device.
You must start and shut down the device each working day.
Note
The device automatically logs out and the touch screen goes dark when the device is
NOT
in use. Using the
touch screen activates the touch screen and lets you log in.
3.1.1 Switch on each day
The image server and scan head must be switched
ON
each day for the device to operate.
3.1.1.1 Switch on the image server
The review, admin and storage services run on the image server. You do
NOT
need to login to the image
server as the server only needs to be switched on.
1. Check that the power supply is switched on.
2. Switch on the image server.
Your image server may also be used as a browser-based review client.
Note
If it seems the image server is not working, check the monitor is switched on then confirm the image server
is switched on.
3.1.1.2 Switch on the scan head
CAUTION
Only use the fabric cover when the scan head is powered
OFF
. Remove the fabric cover
before operating the scan head.
You must start and shut down the scan head each working day.
1. Remove the scan head fabric cover.
2. Check the image server is switched
ON
and fully started up before switching
ON
the scan head.
3. Switch
ON
the scan head.
l
If the scan head has been shut down the status indicator will be
OFF
. Press the power switch
on the back of the scan head to the
ON
( ) position. There will be a short delay while the device
Page 27 of 60
Part Number:
G102748/11_ENG
Copyright
2021
, Optos plc. All rights reserved.
English