page 36
IVPC Software Reference
DS-100C Operating Manual
Disable Power Down “W”
Normally the DS-Tracer turns itself off after 15 minutes without any activity. This
command disables this feature until the DS-Tracer is reset by turning power off.
Format
“W”
Example
command “W”
response “*”
response “>”
Enable Power Down “P”
Normally the DS-Tracer turns itself off after 15 minutes without any activity. This
command enables this feature. By default this feature is enable. This command
is only necessary if the power-down feature has been disabled using the “W”
command.
Format
“P”
Example
command “P”
response “*”
response “>”
Transfer Curve Data “X”
This command is used to transfer curve data from the DS-Tracer. The command
transfers the I-V curve data in binary format. If there are no errors, this command
returns “*” followed by a 1056 byte binary data record.
Format
“X”
Transfer last data record.
Summary of Contents for DS-100c
Page 8: ......
