page 6
IVPC Installation & Quick-Start
DS-100C Operating Manual
IVPC will open a new curve window as shown in Figure 3. This window provides
areas to enter curve information identifying the I-V curve. The DS-Tracer takes
up to 12 seconds to initialize the tracer hardware. Typically you will enter curve
data during this delay. For example, if not using the Auto feature to read an
irradiance or temperature channel, you could enter a value manually at this time.
A status message indicating that the DS-Tracer is pre-charging is displayed in
the area normally used to plot the curve.
Figure 3. New Curve screen while DS-Tracer is pre-charging.
Summary of Contents for DS-100c
Page 8: ......
