page 10
IVPC Installation & Quick-Start
DS-100C Operating Manual
COM port, such as those created by USB to serial adapters or by the DS-100C
USB drivers used for IVPC version 2.X and older, it is possible that this COM
port number has been inadvertently changed.
Use the Windows device manager to confirm the current COM port setting of the
virtual COM port. The COM port number set for this virtual port must match the
COM port number set in IVPC.
Displaying Saved Curves
Stored I-V curves are selected from the Data Grid. The Data Grid displays the
curve files in the current directory. Be sure to set the current working directory to
the sub-directory where the curves are stored. Use the Change Directory
command in the File menu to select a new directory as shown in Figure 7.
To display a curve shown on the Data Grid, double click anywhere on the row for
that curve. A window very similar to the one used to take a curve is displayed.
More than one curve window may be open at the same time. Use the Window
menu to return to the Data Grid and select another curve. The Window menu is
also used to switch between curve windows.
Figure 7. Change Directory dialog box.
Summary of Contents for DS-100c
Page 8: ......