DaVinci 72” SS Timber Fire Log Set
Installation Instructions
Page 20 of 24
17602248 — 7/25/22
© Travis Industries, Inc.
32. Place ember chunks on top of the Ember-Glo glass in front and to the sides of the log grate.
NOTE:
Make sure that no glass or ember chunks are obstructing the slot where the inner glass will rest. If anything
has fallen into the slot, remove it with a vacuum, small screwdriver, or compressed air.
33. Reinstall the inner glass using the glass lifting suction cup set. Take care not to damage the edges of the glass
when placing it back on the fireplace. Place the inner fireback filler pieces back in place. They are held in place by
magnets. Place the bottom edge of the filler piece in the lower corner of the opening and then tilt the filler up until
the magnet secures it to the fireplace.
34. Place Ember-Glo glass over the outer media tray. Make sure the media tray is completely covered so none of the
metal of the media tray is visible.
DRAFT
DRAFT
DRAFT
