DaVinci 72” SS Timber Fire Log Set
Installation Instructions
Page 6 of 24
17602248 — 7/25/22
© Travis Industries, Inc.
8.
Reinstall the burner into the fireplace. The firebox should now look as shown below.
9. Install one of the log #1's in the
back left corner of the log grate.
The front of this log is the side
with the least amount of charring.
When placing this log note that
the front of the log (shown to the
right) faces the back wall of the
firebox. There is a rectangular
cutout in the bottom rear of the
log that fits over the pilot shield.
Place the log on the log grate.
There are notches in the bottom
of the log that rest align with the
log grate fingers. With the log in
place, slide the log away from
the burner and towards the back
wall of the firebox.
Faces the rear glass
Faces you
10. Install the second log #1 in the
front right corner for the log
grate. The front of this log (side
with the least amount of charring)
should face you. The log rests
on the log grate in the same
manner as the previous log. With
the log on the grate, move it
forward (away from the burner)
until it is up against the vertical
log grate fingers.
Faces you
Faces the rear glass
Burner
Cluster
Shield
DRAFT
DRAFT
DRAFT
