DAVID SLS-1 Getting Started Manual Download

Page: 3 / 15

DAVID

DAVID SLS-1

SLS-1

Contents of Package

•

SL Scanner pre-mounted, consisting of

•

Video projector

•

Camera with focusable lens

•

Mounting rack with ball joint (for camera)

•

Tripod with protective bag

•

2 calibration panels with 2 mounting tracks 90°

•

USB drive with DAVID-Laserscanner Pro Edition and camera drivers

•

Accessories for projector

•

External wall power supply

•

Remote control

•

VGA cable

•

HDMI cable

•

2 AV cables (not required for scanner)

•

Protective bag

•

User Manual

•

Adapter set for global power supply

•

USB cable for camera

•

Cable straps

System Requirements

•

Windows XP, Vista or 7 (32-bit or 64-bit)

•

3D graphics adapter

•

Available VGA or HDMI port

•

Two available USB ports

•

Recommended: Dual-core processor, 2 GHz, 4 GB RAM, NVIDIA or AMD graphics adapter

Safety Instructions

•

Only operate the scanner in a dry environment.

•

Do not operate the scanner in areas where there is a risk of explosion.

•

Repairs to the scanner or its components may only be performed by an authorized service centre or the
DAVID-Laserscanner after-sales service.

•

Do not make changes of any kind to your scanner.

3DPE.ir

Summary of Contents for SLS-1
















Search results

Summary of Contents for SLS-1

Reviews:

Related manuals for SLS-1

Brands by name

Popular brands

DAVID SLS-1, Getting Started Manual

Search results

Summary of Contents for SLS-1

Reviews:

Related manuals for SLS-1

Brands by name

Popular brands