13
Function Description
Selector
Switch
Position
Functions and Instructions
Set Timer 2 - ON
4
SET THE COMPLETION TIME OF THE SECOND RUN TIME
SEQUENCE
Select the
Set Timer 2- ON
position on the selector switch. A number ‘
4
’
will appear on the left of the screen.
This time is factory pre-set to 5pm. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
To disable this timer, move up or down to 11:59PM. Press the UP button
one more time to turn OFF. NOTE: This step will also disable the time for
‘Set Timer 2 - OFF’.
Set Timer 2 - OFF
5
SET THE COMPLETION TIME OF THE SECOND RUN TIME
SEQUENCE
Select the
Set Timer 2- OFF
position on the selector switch. A number ‘
5
’
will appear on the left of the screen.
This time is factory pre-set to 11pm. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
Automatic ON
6
FILTRATION SYSTEM SWITCHES ON AND OFF AUTOMATICALLY
ACCORDING TO YOUR SET TIMES
Select the
Automatic ON
position on the selector switch. A number ‘
6
’
will appear on the left of the screen.
Manual ON
7
OVER-RIDES THE AUTOMATIC TIME CLOCK SETTINGS
& SWITCHES FILTRATION SYSTEM ON
Select the
Manual ON
position on the selector switch. A number ‘
7
’ will
appear on the left of the screen.
NOTE: Sanitisation will be constant until turned OFF or back to Automatic
ON. Over sanitisation may occur if left for long durations
OFF
8
OVER-RIDES THE AUTOMATIC TIME CLOCK SETTINGS
& SWITCHES FILTRATION SYSTEM OFF
Select the
OFF
position on the Selector switch. A number ‘
8
’ will appear
on the left of the screen.
NOTE: Filtration & sanitisation will cease. Not recommended for long
durations.
IMPORTANT. Certain local electrical regulations state “If the supply cord
is damaged, it must be replaced by a special cord available from the
manufacturer or its service agent”.
