Datum bc632D, User Manual

Page: 32 / 82

CHAPTER THREE
3-6 bc632D Wall Mount LED Display (Rev A) Datum Inc
ADDR
(SHIFT-F) Set the address of the display.
RETURN
Answer "yes" to an option.
SHIFT
Access the function or character above another key.
CAPS
Toggle between using upper-case and lower-case letters.
INSERT
Insert characters in a string, rather than typing over existing characters.
BACK
Move backwards (left) through a string of characters.
ADV
Move forwards (right) through a string of characters.
DELETE
Remove a character from a string.
The keyboard operates similarly to a typewriter keyboard. If the character above the main key is
desired, press and hold down the SHIFT key and press the main character key. If the character
on the main key is desired, simply press the key. No SHIFT key is needed. The CAPS key only
works on the 26 main letters “A” through “Z.” Pressing a letter key normally produces a capital
letter. To produce lower case letters, press the CAPS key. To return to producing capital letters,
press the CAPS key again.
3.2.3 SOUND CONTROL
The wall display is equipped with a speaker and can generate a tone when you press any key except
SHIFT. If you want the wall display to emit tones while you are programming, press and hold the
SHIFT key while pressing the RUN key. This will turn the tones ON. To turn the tones OFF, press
SHIFT and RUN again. The unit defaults to tone ON when restarting after the loss of power.
3.2.4 ON - OFF
The wall display can be turned on and off without unplugging it. The ON/OFF option does not clear the
programming information stored in memory. Additionally, the internal time clock is continually updated