Datum bc632D User Manual Download Page 38 | Manualshive

Page: 38 / 82

background image

CHAPTER THREE

3-12

bc632D Wall Mount LED Display (Rev A)

Datum Inc

2. GREEN

3. YELLOW

3.3.8 DURATION - CHANGE RUN TIME OF A STEP

This key is used to set the number of seconds that a step will run. If the step is not linked in a sequence,
then the duration value has no effect. The display will show the prompt "DURn," where n is the current
step. Use the editing keys to enter a number between 0 and 255. When entering numbers, you must
use leading zeroes. For example, 10 seconds would be entered as "010."

3.3.9 LINK - LINK TO NEXT STEP

The LINK key allows you to link the current step to the next step to form a sequence. Press SELECT
to toggle between ON and OFF. If link is ON, the display will show this step for the time set in
DURATION, and then it will display the next step. If link is OFF, then the display will run the step for
its DURATION and then go to the beginning of the sequence. The last step in a sequence must have its
link turned OFF. If the link is ON for step 8, then the sequence will continue with step 1.

3.3.10 MASTER (SHIFT-C) - ENABLE DIGITAL TIME MASTER TRANSMISSIONS

The MASTER key can be used to enable or disable the digital time transmissions of the bc632D. If
several displays are wired together on the same network, one can act as a time master for the network.
The remaining displays on the network can synchronize to the master's digital time signals.

To enable this bc632D as a digital time master, use the SELECT key to change MASTER to ON.
Otherwise leave it OFF.

3.3.11 SET TIME (SHIFT-D) - SET INTERNAL CLOCK

The SET TIME key is used to set the time of the Real Time Clock.

There are three ways to set the time of the RTC. First, the clock can be set manually by typing in the
desired time using the remote keyboard. Second, the clock can be synchronized once to the current
time source. And third, the display can be programmed to synchronize to the current source each time
the unit is powered up.

TIME HH:MM:SS DD/MM/YR

Set internal clock.

Sync clock?

Synchronize clock to time code.

et Autosync?

Synchronize clock on every power-up.

«
...
36
37
38
39
40
...
»

Summary of Contents for bc632D



















































































Reviews:

No comments

Related manuals for bc632D

Brand: Acer Pages: 28

Brand: Acer Pages: 28

Brand: Acer Pages: 29

Brand: Acer Pages: 27

Brand: Acer Pages: 5

Brand: Acer Pages: 27

Brand: Acer Pages: 39

TravelMate 220 series

Brand: Acer Pages: 2

Brand: Acer Pages: 19

Brand: IC Sciences Pages: 2

Brand: Radiforce Pages: 48

Brand: LaCie Pages: 9

Brand: LaCie Pages: 4

LCD8205 - MultiSync - 82" LCD Flat Panel...

Brand: NEC Pages: 10

Brand: 4iiii Pages: 2

Brand: Azbil Pages: 34

HAP-19AV Series

Brand: I-Tech Pages: 28

Smart Baby Camera

Brand: Lollipop Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands