Datum bc632D, User Manual

Page: 7 / 82

Datum Inc bc632D Wall Mount LED Display (Rev A) A-1
ADDENDUM A
OFFSET PROGRAMMING
A.0 SET LOCAL OFFSET TIME (SHIFT-D)
The SET TIME function key (SHIFT-D) is used for both set internal clock and set local offset time
features. To enter SET LOCAL OFFSET TIME menu by pressing SHIFT-D, the display first appears
on the SET TIME menu "TIME hh:mm:ss". Without any modification on the SET TIME menu, press
the SELECT key to set local offset time. The display prompts the offset time of the first source display
"OFFSET 1 +/- XX" hour(s). The local offset time can be set to +/- 19 hours. The bc632D module
has the capability to display eight (8) different local offset times from a single time source. When the
SELECT key is pressed again, the display scrolls to the next source display offset time menu. You
may press the RUN function key to exit the SET TIME menu any time.
A.1 PROGRAMMING OFFSET via REMOTE
The following brief example shows set local offset time on source display one:
Press SHIFT D To enter SET TIME menu.
TIME hh:mm:ss
Press SELECT Go to next menu.
OFFSET 1 +00
Type in -08 Type in -08 hours.
Press RUN Exit SET TIME menu.
The time is -08 hours on source 1 (SRC 1)
A.2 PROGRAMMING OFFSET via RS-422
addr aaa set bc632D display address
offset 1 -08 set to -08 hours
end
Note : See Appendix B for bus protocol.