Datum bc632D, User Manual

Page: 21 / 82

INSTALLATION AND SETUP
Datum Inc bc632D Wall Mount LED Display (Rev A) 2-7
2.2 MOUNTING INSTRUCTIONS
The bc632D can be mounted in four different ways:
•
Wall flush mount.
•
Ceiling hanging.
•
Countertop.
•
Wall mounting brackets.
For installation purposes, please note that the bc632D display weighs 4 lbs. Select the mounting
instructions appropriate for your needs.
2.2.1 WALL FLUSH MOUNT
Step 1
Locate the keyhole slots on the back of the case at either end. Note, two sets of keyhole slots are
available. The slots are spaced 16 or 24 inches apart. Use the keyhole slots most appropriate for your
needs.
Step 2
Place two #8 screws into the wall/mounting surface at the selected distances, either 16 or 24 inches
apart. Use the type of screws and anchoring methods appropriate for the mounting surface. For
example, use wood screws if you are mounting to a wood surface. (These screws are not supplied.)
Step 3
Hang the display on the two screws located on the wall/mounting surface.
2.2.2 CEILING SUSPENSION
Step 1
Locate the hanging links in the seam at the top back of the case, near each end.
Step 2
Turn the sign upside down and the links will turn out. The links are spaced 24 inches apart and can be
bent for angle adjustment if needed.
Step 3
From the ceiling, install two chains (or other means) 24 inches apart.