CHAPTER 7
REVISION HISTORY
7.0 GENERAL
This chapter summarizes the TFP hardware revisions and compatibility issues.
REV. A
The original hardware release. This version had a wiring error between the TFP CPU data bus and
the Maxim 7218C LED display driver IC. Basically the data lines were inverted in a high order to
low order bit sense. T h e problem was fixed by rearranging the bits in the firmware before
downloading to the Maxim IC.
REV. B
Fixed wiring error in REV. A
REV. C
The 15 pin D' plug connector was added to allow the ACUTIME GPS antenna to be used. RJ11
connectors J4 and J5 were removed. The reference designators on the silk screen were reordered at
this time.
REV. D
Two filter capacitors were added. These capacitors were parallel with other components on previous
revisions.
REV. E
An oven oscillator option was added and the transformer coupling option was removed. Additional
signals were routed to the P2 connector. A pull down resistor was added to the INTACK line to
prevent indeterminant state before LCA's are loaded. A board stiffener was added.
Datum Inc., Bancomm Div.
bc635VME/bc350VXI Manual
7
-
1