3-22
Placing a TransAdapt, Transcall, or Selcall
Before initiating TCSC operations, the TW7000 must be assigned a
call code (001-225). This is the call code that other stations use to
contact this transceiver.
1.
Press ALPHA, 13, and E.
Display: TA/TC/SC
Rx ADDR xxx
2.
Enter the receive call code and press E. The number must be
from 001-255 and not assigned to another transceiver.
Display: xxx (briefly displays the new receive code)
Selcall: To start a call with Selcall, the TW7000 must be set to a fixed
channel (not scanning) and a call initiated.
1.
Press OPTION until the TCSC icon flashes.
2.
Press STATUS to turn the option ON.
3.
Press C and enter the channel from which to call. Select the
appropriate channel on the transceiver.
4.
Press CALL to initiate the call.
Display: Tx ADDR xxx
5.
Enter the Selcall code of the transceiver to call (001-255). A call
to all channels (Allcall) is code 000.
6.
Press CALL again. The TW7000 begins the call sequence. If
the call is successful, a link alarm sounds.
Display: SC LINK
If the call is unsuccessful, calling is discontinued and NO LINK
displays briefly.
Transcall: The TW7000 must be in scan mode before a call is initi-
ated.
1.
Press OPTION until the TCSC icon flashes.
2.
Press STATUS to turn the option ON.
3.
Press SCAN.
4.
Press CALL to initiate the call.
5.
Enter the Transcall code of the transceiver to call (001-255). A
call to all channels (Allcall) is code 000.
