Operation
3-13
(1) SCAN RATE controls the rate at which scanning proceeds. The
arrow buttons toggle between 2 and 5 channels per second. The num-
ber to the left of the scan rate refers to the option. Option 1 is two sec-
onds per channel, option 2 is 5 seconds per channel.
(2) SCAN GRP selects the ALE scan group (from 0 to 9). This
becomes the specified scan group when using (3) TUNE GRP and (9)
MOD GRP.
(3) TUNE GRP tunes the scan group, selected in (2) SCAN GRP, to
an external antenna tuner. All the channels in that scan group are
tuned.
(4) Rx SELCT controls the receive type: 1 for normal ALE receive/
transmit (Rx/Tx), 2 for receive only (Rx ONLY), or 3 for channel
setup (CH Rx/Tx) of the 9000RAD or RC2 software.
(5) SELF ADRS selects an address number to review, change, or add
for your station (from 00 to 19). To enter a new self address, enter the
number. To change an existing address, scroll to the number and enter
a new one.
(6) SELF NAME enters a new self address name for the address num-
ber selected in (5) SELF ADRS. Any existing address name displays
briefly. Use the alpha characters on the keypad to enter from 3 to 15
characters (no spaces or punctuation).
22
ERR THRSD (error threshold)
23
MESSG OUT (message out)
24
NEW MESSG (new message)
25
MESSG IN (message in)
26
HANDSHAKE
27
NET ADRS (network address)
28
NET NAME (network name)
29
NET SLOT (network slot)
30
NET OTHER (network other)
31
EXIT MENU
Table 3-2
ALE Submenu
Function
Description
