3-6
Knobs, Buttons, and Indicators
period of 10 seconds. For more information on these internal options,
refer to the TW7000 HF Transceiver Technical Manual (TW7000-
MS).
RF Power Level
The RF PWR button allows scrolling through the L (low), M
(medium), and H (high) power settings. Default settings for the RF
power levels are listed below.
Use the following instructions to change these values.
1.
Connect a power meter to the antenna connector on the back of
the transceiver.
2.
Press RF PWR until the desired level displays (L, M, or H).
3.
Press ALPHA, 5, and E.
Display: RF POWER
HI SET xxx (if changed to high power)
4.
CW key the TW7000 and scroll to the power level indicated on
the power meter.
5.
When the desired power level is achieved, press E.
6.
Adjust the other two levels in the same manner.
7.
To exit this mode, press E twice.
Priority Channel
The PRI button adjusts the TW7000 to a channel defined as the prior-
ity channel. The default priority channel is channel 001. To change
the number of the priority channel:
1.
Press ALPHA, 4, and E.
Display: PRIORITYCHANNEL xxx
(where xxx is the existing channel number)
RF Power Level
Default Settings
Alpha 5 Setting
L (low)
10W (average power)
10
M (medium)
25W (average power)
25
H (high)
100W (average power)
200
