Operation
3-7
2.
Enter the new priority channel number and press E.
Display: PRIORITY CHANNEL xxx
(where xxx is the new channel number)
The TW7000 reverts to the new priority channel whenever the PRI
button is pressed.
Alpha Menu
The Alpha menu is used to set and adjust the TW7000 default parame-
ters specific to the 7000TC option (Transcall, Selcall, and Trans-
Adapt). The Alpha menu includes the ALE submenu, it is used to
change settings specific to the ALE option (7000ALE).
To access the Alpha menu, follow these steps:
1.
Press ALPHA and enter the number of the corresponding func-
tion.
2.
To enter the function, press E.
Once a function is selected and entered, use the arrows on the keypad
to scroll through the settings within that function. When a desired set-
ting displays, press E to accept the setting and return to the Alpha
menu. To exit a function without saving the changes, press ALPHA.
To exit the Alpha menu, press ALPHA again.
Table 3-1
Alpha Menu
Function
Description
1
OPTION (not used)
2
SCAN SET CHANNEL (for non ALE)
3
SCAN RATE (for non ALE)
4
PRIORITY CHANNEL
5
RF POWER (TX)
6
FREQ BLANK
(blanks LCD frequency, disables mode select buttons)
7
LOCKOUT
(disables frequency changes and mode select buttons)
8
RECEIVE SET Rx ONLY (disables TX operation)
9
SET CLOCK (if option installed)
10
ALARM TIMER ON/OFF
