10.
Scroll down to the RF Power screen and set
LO
PWR
to
0.5W
and
HI
PWR
to
.5W
.
11.
Scroll down to the next screen. Press
<
ENT
>
to accept the channel
settings.
12.
Press
<
ESC
>
several times to get back to the operating screen. The new channel is ready to use.
To simplify programming, assume the following defaults unless told otherwise by the person
assigning channel settings:
•
RX Frequency must always be specified
•
TX Frequency must always be specified (unless RX Only)
•
TAG is any 8 character alphanumeric value
•
ID is internal radio information and cannot be changed
•
If using a repeater, a Transmit CTCSS, DCS, or NAC code must be assigned.
Refer to the following tables that describe the different settings for analog and digital channels,
respectively.
Analog Settings
Setting
Value
Description
ID
User ID
Software assigned identifier.
TAG
Name
User defined channel name.