Datron guardian II series Operator'S Manual Download Page 41 | Manualshive

Page: 41 / 47

Datron guardian II series Operator'S Manual Download Page 41

7: FIRE FEATURES OPTION

This chapter assumes a knowledge of the standard operation of the Guardian portable radio
detailed in the preceding chapters of this manual.

Introduction

The Fire Feature option is designed for users in a high-risk fire environment or a similar special
setting. This option adds the following features to the Guardian portable radio.

•

Tone picklist

•

P25 Talkgroup picklist

•

P25 UnitID picklist

•

Event bank for setting up an additional 3 zones of 16 channels each. Also known as
incident command (ICP) bank

•

Protected zone capability

•

Enhanced radio-to-radio cloning

Event Bank

A special Event bank simplifies incident command radio programming. It is the bank into which
single zones are cloned. The Event bank has some special characteristics:

•

The Event bank adds 3 additional zones of 16 channels each for an additional 48 possible
channels. This brings the total number of user channels up to 1120 (48 primary channels
plus 48 shadow channels). An additional four channels are reserved for the priority, home,
and emergency channels.

•

Unlike the main bank, each channel is independent. Changes to an Event bank channel do
not affect other channels of the same name in the radio.

•

Each Event bank channel can have a maximum of 1 shadow channel. If additional shadow
channels are cloned into the Event bank, only the first shadow channel is cloned (per
channel).

•

The Event bank is predefined as Bank 9.

•

Event zones are predefined as Zones 65, 66, and 67. Their zone names can be changed but
their zone ID remains constant. If the toggle switch is defined as Zone Select, the
following assignments apply:

Switch Position A: Zone 65
Switch Position B: Zone 66
Switch Position C: Zone 67

•

Zone 65, 66, 67 correspond to Zone A, B, and C respectively for the toggle switch and
used as Zone Select. Use the Next Zone auxiliary button to toggle through Zones 65, 66,
and 67.

•

Event Zones cannot be protected.

•

The

Z

icon on the display is inverted to provide a visual indication that the radio is in the

Event bank.

Cloning

The following cloning options exist for radio’s equipped with Fire Features. They can be
performed in any combination.

«
...
39
40
41
42
43
...
»

Summary of Contents for guardian II series
















































Reviews:

No comments