Cardiac Output Modules, M-COP and M-COPSv
Document No. 8001012-1
1
INTRODUCTION
This section provides information for the maintenance and service of Cardiac Output Modules, M-
COP and M-COPSv. Cardiac Output Modules, M-COP and M-COPSv are single width plug-in
modules designed for use with the S/5 monitors. Later in this manual modules can be called w/o
system name S/5.
Both modules provide
•
Cardiac output (C.O.)
•
Right ventricular ejection fraction (REF)
•
Invasive blood pressure (InvBP) measurement
Additionally, the COPSv module provides venous oxygen saturation (SvO
2
) measurement.
NOTE: Do not use identical modules in the same monitor simultaneously.These modules are
considered as identical and would cause communication errors if used in the same system.
Figure 1
Cardiac Output Module, M-COP, and Cardiac Output and SvO
2
Module, M-
COPSv
