Datex-Ohmeda CAPNOMAC ULTIMA, Service Manual

Page: 19 / 232

CAPNOMAC ULTIMA
TM
SERVICE MANUAL
3-7
3.4
Software changes
The software code (six numbers) and revision number (if other
than initial revision) are displayed on the screen during the startup
sequence.
Software P/N 875345-4 is the initial production English language,
877340-2 is the initial production French language and 877412 is
the initial production German language versions. These software
are installed also in revision -01 monitors (see Section 9.1 for
detail).
Software P/N 879016 is the revision -02 (except ULT-l/S-27-01
and ULT-V-xx-00) production English language, 879244 is the
German language, and 879245 is the French language versions.
Differences to the initial software versions are:
30-minute trend added to Graphic trends of 2 h, 6 h, and 12 h.
Parameter configurations of the trend pages have been modified
and a fourth page is added in order to include V-model
parameters.
Numeric trend is added. Its time scale is 12 hours.
Selection of anaesthetic agent became easy. Pressing of the SET key
is no longer necessary.
SEIKO DPU-411 printer is added to the printer selection.
Selection of
O
2
scale is added in the SETUP SCREEN menu. The
choices are 0 to 100 %, 10 to 60 %, DIFF/30 %, or DIFF/X % (X
is the same number as in CO
2
scale selected, e.g., 6, 10, or 15).
This selection is valid both in waveform and trends.
In the Start-up menu the user can now select to display either
balance gas or MAC values. This selection also has an effect on
graphic trends page 3.
Pleth amplitude indicating bar is now shown at the left corner of
Pleth waveform field.
Display field of SpO
2
value digits can be moved from the lower
right side (factory default) to the lower left side in Start-up menu.
EtCO
2
value digits can be enlarged as big as SpO
2
digits in Start-
up menu. Factory default is the normal small size.
A 1.2 % scale is added for the anaesthetic agents display.
January 15th, 1997/6