Datex-Ohmeda CAPNOMAC ULTIMA, Service Manual

Page: 12 / 232

CAPNOMAC ULTIMA
TM
SERVICE MANUAL
2-3
Always switch the monitor off before making any connections with
external equipment.
Avoid ammonia-, phenol-, or acetone-based cleaners for they may
damage the monitor’s surface.
Electrostatic discharge through the pc boards may damage the
components of the monitor. Handle all pc boards by their non-
conductive edges and use anti-static containers when transporting
them. Before replacing and repairing pc boards, wear a static
control wrist strap to discharge any accumulated static charge.
Do not disassemble the ACX measuring unit. The unit is repaired
and adjusted at the factory.
When removing or inserting any part into the monitor, be careful
not to kink or damage the gas sample tubes. Leakages in the gas
sampling system affect accuracy of measurement and are difficult
to detect.
When servicing the sampling system, make sure not to leave any
tubes touching the sampling pump. Abrasion may damage the
tubes.
Do not apply tension to the power cord.
Do not autoclave the monitor nor probes.
Do not gas sterilize the monitor.
Equipment classification
Classification according to IEC 601-l:
* CLASS 1 equipment according to the type of protection against
electrical shock.
* TYPE BF equipment according to the degree of protection
against electrical shock.
* ORDINARY equipment according to the degree of protection
against harmful ingress of water.
* Equipment not suitable for use in the presence of FLAMMABLE
ANAESTHETIC MIXTURE with air or with OXYGEN/NITROUS
OXIDE.
* CONTINUOUS OPERATION according to the mode of
operation.
January 15th, 1997/6