Datex-Ohmeda CAPNOMAC ULTIMA, Service Manual

Page: 14 / 232

CAPNOMAC ULTIMA
TM
SERVICE MANUAL
3-2
The basic
CAPNOMAC ULTIMA
TM
model ULT-1 measures CO
2
,
N
2
O, O
2
, and AA. The additional parameters and their symbols are
explained below.
S
S P O
2
V
Patient Spirometry
TM
i Agent ID
This manual describes all the functions offered by the
CAPNOMAC ULTIMA
TM
monitor. Some of the functions may not
be available in the monitor you are using.
ACX-200 Measuring board measures sevoflurane and desflurane in
addition to halothane, isoflurane, and enflurane. The difference
between the ACX-200 Measuring board and ACX-100 Measuring
board is that the former contains several precision resistors. The
ACX-200 Measuring board can simply be used to replace the
ACX-100 Measuring board but not vice versa. Unless otherwise
noted, the description of ACX-100 Measuring bench/board is also
valid to ACX-200 Measuring bench/board.
ASX-100 identifies halothane, isoflurane, and enflurane. ASX-200
identifies halothane, isoflurane, enflurane, sevoflurane, and
desflurane.
If ASX-100 is replaced by ASX-200 (or i-kit which includes
ASX-200 is installed in the monitor), ACX must be upgraded to
ACX-200 and the main software replaced (the i-kit includes the
main software).
Please review the Operator’s Manual to obtain a clear
understanding of the monitor.
The manufacturer reserves the right to make changes in product
specifications at any time and without prior notice. The
information in this document is believed to be accurate and
reliable; however the manufacturer assumes no responsibility for its
use.
January 15th, 1997/6