EN
Dateq BCS70 Manual
Installation
4
Installing the mixer unit
The BCS70 is supplied as standard w ithout a cabinet or connector cables. It is possible to
make cables for connection to the Sub-D connectors of the various input and output modules
in-house. In that case, metal caps for the Sub-D connectors and cables w ith a separate
screening should be used, as per the CE norms.
Breakout boxes
Another possibility for connecting the mixer unit is to make use of so-called 'breakout boxes'.
All non-standard Sub-D connector on the rear of the BCS70 can be split up into more usual
connector types such as XLR plugs and TSR jacks. Breakout boxes should be connected to
the BCS70 using shielded Sub-D cable.
Installation into the cabinet
The BCS70 frame fits into an opening of 1050 x 547 x 75 mm (W x H x D). Without the meter
bridge the mixer unit projects 72 mm above the table top, w ith the meter bridge the highest
point is 205 mm. See also the dimensioned draw ing below .