DT1310 xx xx
36
20220128-V0
8. Fault rectification
8.1. Fault finding
The fault finding must be carried out by trained and
authorized personnel only!
•
The green indicators is dark
→
check the power supply.
If the supply voltage is OK: the instrument is defective.
•
There is no output signal
→
check the device connected
to the input.
When the result of fault finding is that the DT1310 xx xx is
defective call the manufacturer service department.
8.2. Repairing
There is no user repairable part inside the instrument.
In accordance with Point
2.1.: For safety and warranty
reasons, any internal work on the instrument must be
carried out by DATCON personnel.
Summary of Contents for DT1310 Series
