DT1012 IP
20221107-V0
31
8. Fault rectification, repair
8.1. Fault finding
The fault finding must be carried out by trained and authorized
personnel only!
•
The green indicator is dark
→
check the power supply.
If the supply voltage is OK: the instrument is defective.
•
The red error indicator lights up
→
count the flashes of the red
indicator, and find the error interpretation in chapter
7.9. Error
display
.
If you cannot eliminate the error based on the error detection result
(incorrect input signal, incorrect settings, etc.) call the manufacturer
service department.
8.2. Repairing
There is no user repairable part inside the instrument.
In accordance with Point
2.1. Authorized personnel: For safety and
warranty reasons, any internal work on the instrument must be
carried out only by DATCON personnel.
