Datavideo PTC-140, Instruction Manual

Page: 68 / 84

68
How to Change the Video Output Resolution
Please follow following steps for changing the video output resolution.
Step 1. Please select your desired video output resolution from the Video OUT
Format drop-down menu.
Step 2. Please click the “Save” button and then the video output resolution is
set successfully.
9.2.2.9 Network Configure-Network Port
The Network Port option provides users information for different ports
including Port Data, Port Web, Port Onvif, Port Soap, Port RTMP, Port RTSP
and Port Visca. All of those port numbers are default values, so it is no need
for users to change them. Please see following diagram for the main interface
of the Network Port. However, if it is needed to change the port number,
users can enter their desired port number and then click the “Save” button
and then the port number is modified successfully.
9.2.2.10 Ethernet
The Ethernet option provides network related parameters for users including
IP Address, Subnet Mask, Default Gateway and MAC Address. Moreover, it
also allows users to set the camera in DHCP mode. Please see following
diagram for the main interface of the Ethernet option.