manualshive.com logo in svg

Datavideo PTC-140, Instruction Manual, Page: 49 / 84

Share
Download
Datavideo PTC-140 Instruction Manual Download Page 49

49 

 

9.2.1.3 How to Recall the Pre-saved Preset 

Please follow following steps for recalling the pre-saved Preset.  
Step 1. Please select the Preset number that the preset position is pre-saved 
from the Preset drop-down menu.  

Step 2. After the Preset number is selected, please click the Run button  and 
then the pre-saved preset position of the camera lens will be recalled.  

9.2.1.4 How to Change the PTZ Speed of the Camera 

The default number of the PTZ speed control slider is 50 and the range for 
adjusting is from 0 to 100. Please follow following steps for adjusting the PTZ 
speed of the PTC-140T camera.  

Step 1. Please slide the PTZ speed control slider

 to the left side to 

reduce the pan and tile speed of the camera lens according to the number. 
The lower the number, the slower the pan and tilt speeds of the camera. 
Moreover, the higher the number, the faster the pan and tilt speeds of the 
camera. 

9.2.2 Configuration 

The Configuration option provides users to set many parameters of the PTC-
140T camera including Audio Configuration, Video Configuration, Network 
Configuration and System Configuration. There are several parameters for 
each configuration, please see following paragraphs for more details.  
 

9.2.2.1 Audio Configure 

The Audio Configure option allows users to set audio related parameters for 
the input audio source. The main interface of the Audio Configure option is 
shown as following diagram.  
 

 

Summary of Contents for PTC-140





















































































Reviews:

No comments