35
Datavideo Technologies Co., Ltd
www.datavideo.info
spectrum width to 20MHz will help to reduce interference on the link
and improve performance. 10Mhz and 5Mhz widths can also be used
to further reduce interference and improve range. Please note
however that a 10Mhz width will provide approximately ¼ the
throughout at 20Mhz and a 5Mhz width will provide approximately ¼
the performance. (Only supported between other units with
10/5Mhz support, all connected units must be configured with the
same channel width)
Note: 40MHz bandwidth is non-standard for 802.11n/g mode, if you
experience unstable performance change the channel width to
20Mhz.
Maximum:
checking this box will result in maximum TX output power
overriding regulation.
Obey Regulatory Power:
checking this box will obey TX output
regulatory power by country.
Channel Scan List
Check to enable Channel Scan List. Users can then mark and select
