33
Datavideo Technologies Co., Ltd
www.datavideo.info
Wireless Mode:
Station
Remote AP-ESSID
This is the Service Set Identifier used by station to seek and connect
to the access point of same the SSID.
Site Survey
Site Survey will search for available wireless networks in range on all
the supported channels and will allow you to select one for
association. In case the selected network uses encryption, you’ll
need to set security parameters in the wireless security section.
Click Scan to re-scan the Access Points in range. Select the Access
Point from the list and click close this window. The site Survey
channel scan list can be modified using the Channel Scan List
control.
Remote AP – Lock to MAC
Enter the MAC address of the remote access point the device is
connected to. This option will make device only connect to this
access point.
Remote AP - Preferred MAC
Enter the MAC address of the preferred access point you want the
device to connect to when it first starts up. Up to 4 MAC addresses
can be entered. Priority is from top to bottom. In the event all
preferred MAC addresses are not available the device will then
pick the matching SSID access point with the strongest signal.
