13
Datavideo Technologies Co., Ltd
www.datavideo.info
By default the NVW-250s secondary radio is configured as a
2.4Ghz local access point without any security, to change this
configuration:
11.
Select
BASIC WIRELESS
then
RADIO 2.
12.
Optional:
Uncheck the
No Country Set
box and select your
country of residence from the drop down menu. Please Note:
Some countries have DFS (Dynamic Frequency Selection)
characteristics enforced by regulations, this may cause a
delay of 2 to 10 minutes for both devices to finish scanning
and establish a connection.
13.
Select either
NA
(5Ghz 802.11a/n) or
NG
(2.4Ghz 802.11g/n)
for the
Wireless Profile
field. We recommend using
NG
for
the local access point for increased device compatibility.
14.
Finally you can configure wireless security for the local
access point. To enable security select the
WPA2
option from
the
Security
drop down menu and then enter your password
of choice into the
WPA Preshared Key
field.
15.
Click
Apply Settings
and then save the changes.
One the second NVW-150 or NVW-250 Unit
1.
Connect your computer to the second units Ethernet port.
2.
Open a web browser (For example Google Chrome, Internet
Explorer) and navigate to
192.168.168.1.
3.
Log-in to the web interface with the username
admin
and
password
password.
4.
Select
BASIC Network
and change the
IP Address
fields value
to
192.168.168.2.
, you should increment the IP address for
each additional unit you connect for example the unit after
this should be assigned 192.168.168.3.
